User Tools

Site Tools


shutting_down

Differences

This shows you the differences between two versions of the page.

Link to this comparison view

Both sides previous revision Previous revision
Next revision
Previous revision
shutting_down [2018/03/20 14:17]
rachel.waugh
shutting_down [2018/03/20 14:28] (current)
rachel.waugh
Line 1: Line 1:
-After you have stopped scanning, ​and want to shutdown the system. ​+After you have stopped scanning, ​ 
  
-====Click "​Stop"​ on both the Velodyne ​then the INS====+====Click ​the red "​Stop"​ on the Velodyne====
  
-(The snoopy should have turned from green to red).+====Wait a moment, then click the red "​Stop"​ button on INS====
  
-====Go to the hamburger drop down bar.====+Now, after the tabs are red and the system has stopped recording;
  
-====Click on the Shutdown tab====+====Go to the hamburger drop down menu====
  
-====Click"​Shutdown"​.====+====Click ​on the "​Shutdown" ​tab==== 
 + 
 +====Click the red "​Shutdown"​ button==== 
 + 
 +====It will ask you if you really want to shutdown? Press, "​Ok"​====
  
 It may say "​Unable to power down snoopy"​ but it has shutdown but because the system is still running, it says this. At this point you have stopped logging data.  It may say "​Unable to power down snoopy"​ but it has shutdown but because the system is still running, it says this. At this point you have stopped logging data. 
shutting_down.1521580655.txt.gz · Last modified: 2018/03/20 14:17 by rachel.waugh

Bitnami