User Tools

Site Tools


shutting_down

Differences

This shows you the differences between two versions of the page.

Link to this comparison view

Next revision
Previous revision
shutting_down [2017/10/30 12:05]
rachel.waugh created
shutting_down [2018/03/20 14:28] (current)
rachel.waugh
Line 1: Line 1:
-After you have stopped scanning ​and clicked "​Stop"​ on both the Velodyne and Snoopy:+After you have stopped scanning,  ​
  
-(The snoopy should have turned from green to red).+====Click the red "​Stop"​ on the Velodyne====
  
-=Go to the hamburger drop down bar.=+====Wait a moment, then click the red "​Stop"​ button on INS====
  
-=Click on the Shutdown tab=+Now, after the tabs are red and the system has stopped recording;
  
-==Click"​Shutdown"​.==+====Go to the hamburger drop down menu==== 
 + 
 +====Click ​on the "​Shutdown" ​tab==== 
 + 
 +====Click the red "​Shutdown"​ button==== 
 + 
 +====It will ask you if you really want to shutdown? Press, "​Ok"​====
  
 It may say "​Unable to power down snoopy"​ but it has shutdown but because the system is still running, it says this. At this point you have stopped logging data.  It may say "​Unable to power down snoopy"​ but it has shutdown but because the system is still running, it says this. At this point you have stopped logging data. 
shutting_down.1509390323.txt.gz · Last modified: 2017/10/30 12:05 by rachel.waugh

Bitnami