User Tools

Site Tools


This is an old revision of the document!

After you have stopped scanning and clicked “Stop” on both the Velodyne and Snoopy:

(The snoopy should have turned from green to red).

=Go to the hamburger drop down bar.=

=Click on the Shutdown tab=

Click, "Shutdown".

It may say “Unable to power down snoopy” but it has shutdown but because the system is still running, it says this. At this point you have stopped logging data.

shutting_down.1509390323.txt.gz · Last modified: 2017/10/30 12:05 by rachel.waugh