User Tools

Site Tools


To enable dual return mode, please do the following:

1. Connect to your scanner's wireless access point 2. Direct your browser to, and you should see the following webpage: image.png 3. Change return type to Dual 4. Click Save Configuration

NOTE: If you are using an HD32E laser head the data-rate in Dual return mode will be too fast for the small 128GB Sandisk Ultrafit. So, we recommend using the Sandisk Extreme Pro USB 3.1 drive to prevent data loss.

dual_return_mode.txt · Last modified: 2018/11/16 09:00 by rachel.waugh