User Tools

Site Tools


transferring_downloading_data

Differences

This shows you the differences between two versions of the page.

Link to this comparison view

Both sides previous revision Previous revision
transferring_downloading_data [2017/05/03 08:13]
elaine.boyd
transferring_downloading_data [2018/02/13 07:19] (current)
will.lucas
Line 10: Line 10:
   - Open an internet browser and go to "​192.168.0.1"​   - Open an internet browser and go to "​192.168.0.1"​
   - Navigate to the "​Sync"​ page and select the project from the NUC you wish to transfer to the hard drive. Select "​Copy"​   - Navigate to the "​Sync"​ page and select the project from the NUC you wish to transfer to the hard drive. Select "​Copy"​
-    ​Best practice is to allow the data to complete ​transfer ​and confirm via computer that all data is present on the hard drive before removing the project ​from the NUC. Once removed, ​it cannot be recovered.+  ​Once the transfer ​has completed successfully,​ press the "​Eject"​ button. Do **not** forget this step as data loss will most likely occur. You can now safely disconnect ​the drive from the NUC and plug it into your PC for further processing.
  
 == Method 2: Transfer to computer over WinSCP via WiFi == == Method 2: Transfer to computer over WinSCP via WiFi ==
transferring_downloading_data.txt ยท Last modified: 2018/02/13 07:19 by will.lucas

Bitnami