User Tools

Site Tools


starting_and_stopping

Differences

This shows you the differences between two versions of the page.

Link to this comparison view

starting_and_stopping [2016/01/04 10:10]
elaine.boyd created
starting_and_stopping [2016/01/04 13:42] (current)
elaine.boyd
Line 7: Line 7:
     - If several beeps occur in rapid succession, please check that micro SD cards are inserted to every viewing angle. The viewing angle LED(s) that blinks rapidly and then quits is encountering an issue – see [[what_the_beeps_mean|What the beeps mean]] for more instructions and details.     - If several beeps occur in rapid succession, please check that micro SD cards are inserted to every viewing angle. The viewing angle LED(s) that blinks rapidly and then quits is encountering an issue – see [[what_the_beeps_mean|What the beeps mean]] for more instructions and details.
   - To mute or unmute GoLook, press the left button on the key fob.{{ :​golookmutebutton.jpg?​direct&​100 |}}   - To mute or unmute GoLook, press the left button on the key fob.{{ :​golookmutebutton.jpg?​direct&​100 |}}
-  - When finished with imagery collection, press the center button on the key fob. Once the cameras will stop blinking, GoLook will return to sleep mode.+  - When finished with imagery collection, press the center button on the key fob. Once the camera ​stop blinking, GoLook will return to sleep mode.
   - To end the job make sure the camera is no longer recording – no beeping or flashing – and safely disconnect the pod from power.   - To end the job make sure the camera is no longer recording – no beeping or flashing – and safely disconnect the pod from power.
- 
-  
- 
- 
starting_and_stopping.txt · Last modified: 2016/01/04 13:42 by elaine.boyd

Bitnami