User Tools

Site Tools


order_of_connecting_to_ladybug

Differences

This shows you the differences between two versions of the page.

Link to this comparison view

Both sides previous revision Previous revision
order_of_connecting_to_ladybug [2016/08/22 13:50]
elaine.boyd
order_of_connecting_to_ladybug [2016/08/22 13:50] (current)
elaine.boyd
Line 6: Line 6:
     - //The portion of the image outlined in red is the initial connection.//​     - //The portion of the image outlined in red is the initial connection.//​
     - **You __must__ be connected to a USB 3.0 port to properly connect to the LadyBug.**     - **You __must__ be connected to a USB 3.0 port to properly connect to the LadyBug.**
-  - Open LadyBugCap from program list. The icon MUST appear as in the following image. {{ :​lbcapicon.jpg?​direct&​100 ​|}}+  - Open LadyBugCap from program list. The icon MUST appear as in the following image. {{ :​lbcapicon.jpg?​direct50 ​|}}
   - Choose the camera and press OK.{{ :​lbcap.png?​500 |}}   - Choose the camera and press OK.{{ :​lbcap.png?​500 |}}
     - NOTE: If the Camera List Interface displays “USB 2.0” and not “USB 3.0” you must disconnect the black USB cable from the USB Hub, wait several seconds, and reconnect.     - NOTE: If the Camera List Interface displays “USB 2.0” and not “USB 3.0” you must disconnect the black USB cable from the USB Hub, wait several seconds, and reconnect.
order_of_connecting_to_ladybug.txt · Last modified: 2016/08/22 13:50 by elaine.boyd

Bitnami