User Tools

Site Tools


mounting_system_on_an_uav

Differences

This shows you the differences between two versions of the page.

Link to this comparison view

Both sides previous revision Previous revision
mounting_system_on_an_uav [2017/10/30 12:28]
rachel.waugh
mounting_system_on_an_uav [2018/01/19 07:02] (current)
rachel.waugh
Line 8: Line 8:
 3. After you mount your Scanner, then you are ready to hook up your scanner to the antenna via antenna cable, and then connect to the your power source (battery) via battery cable. 3. After you mount your Scanner, then you are ready to hook up your scanner to the antenna via antenna cable, and then connect to the your power source (battery) via battery cable.
  
-Go to lidarusa.com/​resources/​trainingportal ​for this video, the video shows exactly how to mount your scanner to a UAVand it shows all the necessary parts you need in order to go scan on a UAV. (You will need a password from Lidarusa to view the page)+Go to lidarusa.com/​resources/​trainingportal ​to watch this training ​video. The video will show you exactly how to mount your scanner to a vehiclealso it shows all the necessary parts you need in order to go scan. (You will need a password from Lidarusa to view this page)
  
 https://​www.lidarusa.com/​training-portal.html https://​www.lidarusa.com/​training-portal.html
  
  
mounting_system_on_an_uav.txt ยท Last modified: 2018/01/19 07:02 by rachel.waugh

Bitnami