User Tools

Site Tools


installing_ladybug_data_capture_software

Installing Ladybug Data Capture Software

  1. Initiate the setup by double-clicking the ladybugcap***x64.exe application.
  2. Select “Next”. Choose the destination folder and select “Next” again.
  3. Press “Install” - leaving the default name. This step may take several moments.
    1. At this point, the Point Grey Ladybug SDK will be installed.
  4. Accept the terms of License Agreement and press “Next”
  5. Follow the installation through the Release Notes and User Information. (The program can be automatically registered with Point Grey via the internet at your own discretion.)
  6. Continue through the Destination Folder and then choose the “Complete” Setup Type.
  7. In the Driver Selection portion, select the options as shown in the image below:
  8. Confirm the choice and select “Next”
  9. To optimize performance, deselect the processor idle states option. Leaving this selected will set your computer to perpetually run the fan until the program is reinstalled with the option deselected.
  10. On the final page, select “Install” and you will be directed to the Ladybug SDK Installation screen. This installation may take several minutes.
  11. Select “Finish” and then finish the initial setup window.
installing_ladybug_data_capture_software.txt · Last modified: 2016/02/26 10:23 by elaine.boyd

Bitnami