User Tools

Site Tools


how_to_fly_trex_systems_on_a_uav

Differences

This shows you the differences between two versions of the page.

Link to this comparison view

Both sides previous revision Previous revision
how_to_fly_trex_systems_on_a_uav [2018/04/23 14:47]
rachel.waugh
how_to_fly_trex_systems_on_a_uav [2018/04/23 14:48] (current)
rachel.waugh
Line 15: Line 15:
 7. Press “Start” for the APX-15 Press “Start” for the Velodyne – (both should be green) 7. Press “Start” for the APX-15 Press “Start” for the Velodyne – (both should be green)
  
-8. Let your system run for 10 minutes on the ground prior to taking off for flight or driving.+=====8. Let your system run for 10 minutes on the ground prior to taking off for flight or driving.=====
    
-9. Then take off and fly in the X (right direction in the vehicle frame for ten seconds). ​+=====9. Then take off and fly in the X (right direction in the vehicle frame for ten seconds).===== 
  
-10. Stop and turn 180°.+=====10. Stop and turn 180°.======
  
-11. Then go back to your starting point.+=====11. Then go back to your starting point.=====
  
 12. Now you can fly in your automated flight!!!! 12. Now you can fly in your automated flight!!!!
  
-13. Land – Let your system run for 10 minutes.+=====13. Land – Let your system run for 10 minutes.=====
  
 14. Now you can go back to the web address: ​ 192.168.0.1 (refresh your page) 14. Now you can go back to the web address: ​ 192.168.0.1 (refresh your page)
how_to_fly_trex_systems_on_a_uav.txt · Last modified: 2018/04/23 14:48 by rachel.waugh

Bitnami